Location: 800 Battery Avenue SE Atlanta GA 30339
Acoustic Testing Pro Do Sensor Do Probe
This Do sensor do probe has accuracy of + or – 0.1 mg per L + or – 0.1 ppm + or – 1 %, resolution, 0.01 and frequency of recommended measure of > 5 s.
Features
- The Optical Dissolved Oxygen technology is based on luminescent optical
- Technology
- The Optical Dissolved Oxygen sensor is approved by the ASTM International
- Method D 888 to 05
- Without calibration requirements and thanks to an ultra low power
- Technology, the Optical Dissolved Oxygen sensor meets the demands of field
- Works and short or long term campaigns
- Without oxygen consumption, this technology allows you an accurate measure
- in all situation and especially in very low oxygen concentrations
Technical Specifications
| Measure ranges | 0.00 mg to 20.00 mg per L 0.00 ppm to 20.00 ppm, 0 % to 200 % |
| Resolution | 0.01 |
| Accuracy | + or – 0.1 mg per L + or – 0.1 ppm + or – 1 % |
| Response time | 90 % of the value in less than 60 seconds |
| Frequency of recommended measure | > 5 s |
| Signal interface | Modbus RS 485 (standard) and SDI to 12 (option) |
| Sensor power-supply | 5 V to 12 V |
| Consumption | Standby 25 µA, Average RS 485 (1 measure or seconded) 4.4 mA, Average SDI to 12 (1 measure or seconded) 7.3 mA, Current pulse of 100 mA |
| Material | Stainless steel 316 L |
| Maximum pressure | 5 bars |
| Connection | 9 armored connectors, polyurethane jacket, bare wires or waterproof Fisher connector |
| Protection | IP 68 |
| Temperature compensation | Via NTC |
| Stocking temperature | 14 °F to 140 °F (- 10 °C to + 60 °C) |
| Weight | Stainless steel version 2.02 lb(0.45 kg) (cable of 3 m), Titanium version 2.02 lb (0.3 Kg) (cable 3 m) |
Be the first to review “Acoustic Testing Pro Do Sensor Do Probe”
Reviews
There are no reviews yet.